CNC Semi-Synthetic Coolant L-MPSS-4 数控机床 切削液 / 冷却液
อัพเดตล่าสุด
ราคา:
ขอราคา
Share Product:
รายละเอียด
| Typical Characteristics ： | ||||||||
|---|---|---|---|---|---|---|---|---|
| Appearance | ： | Concentrate | ： | Clear Beige Liquid | ||||
| ： | Solution | ： | Milky White | |||||
| Specific Gravity | ： | @ 20°C | ： | 0.962 | ||||
| Viscosity | ： | @40°C | ： | ~92mm²/s | ||||
| pH Value | ： | @ 4% Solution | ： | 9.18 | ||||
| Corrosion Protection | ： | @ 4% Solution | ： | 0 degree | ||||
| Corrosion Test | ： | @ 5% Emulsion | ： | @ 100°C (3hours) | ||||
| Aluminium | ： | 6061T6 | ： | No Visible Stain | ||||
| Aluminium | ： | 7075T6 | ： | No Visible Stain | ||||
*** The information and data contained herein are believed to be correct, but no representations, guarantees or warranties of any kind are made as to its accuracy,
suitability for particular applications or the results to be obtained therefrom. It is the responsibility of the user to ensure that the products are used in the
applications for which they are intended.
Click here - for Payment Details !!!
Model: L-MPSS-4 (Semi-Synthetic)
Capacity: 20L
Product Descriptions
L-MPSS-4
- A medium pH high performance semi-synthetic, emulsion based machining coolant.
- For all type of machining process on Steel, Cast Iron, Aluminum, and Stainless Steel.
- Can be used for both individual and centralized coolant system on various machines.
- Machining on Steel, Cast Iron, Aerospace Aluminium 6061 T6 and 7075 T6 parts, Defense equipment,
communication equipment and other.
- Lower consumption has been experienced in most cases.
- Specialist designed for Heat Sink, Automotive, sintered metal and Camera parts. It is
non-staining to 7075 T6 and 6061 T6 Aluminium.
Usage:
It is recommended to add the concentrate into water (Soft water < 50 PPM) at minimum 5 % for Aluminum
machining. For Cast Iron, Sintered Steel and Stainless Steel, add 2 % to recommendation range. For
example:
1. Milling, Turning, Drilling, Tapping and Reaming 5 - 10%
2. Broaching >10%
3. Deep Drilling >10%
4. Surface Grinding 5%
5. Cylindrical and Centreless Grinding 6%
6. Mirror finishing on 6061 T6 Aluminium using Single Crystal Diamond 5 to 10 %
Mirror finishing using ULTRACOOL SS4@ 10% on 6061 T6 and 7075 T6 using SCD tools always provide
longer tool.
Remarks:
- It is possible for a slight difference between the actual product and the picture shown.
- All products are 100% brand new.
- If you have after-sales problems, please contact the sales person and we will solve it for you as soon as possible!
- Due to overweight problem, if the order quantity is more than 1 pail, please order separately.
- Please contact customer service directly if any parts and accessories cannot be found in our store, we will try our best to meet your needs！
- Welcome and Thank you for visiting!
ข้อมูลจำเพาะ